This is a basic hood with Fox Ears. Different ear sizes & shapes are available on request. Just contact us and we can customize it however you desire.
You can expand The maroon boxes by clicking on them.
How to Measure
To measure for custom sizing or to find your standard hood size:Measure around your head at the eyebrows, and use a mirror to ensure the tape is straight and not at an angle. If you have thick hair, measure including how your hair will be under the hood as this affects sizing. Include both measurements.
Measure your neck at the center, the smallest part not the top or bottom. If your hair will be down the back of the hood measure over the hair as well and provide both measurements (to ensure we add room in the back and not all around for neck size)
If you want to ensure a perfect fit or are unsure about your nose size, follow the instructions below.
For nose and to ensure we get the best fit you can send in photos of your head from the front and side. If you have long hair please take 1 shot with it down and 1 shot with it up so we can see the full shape of your head. Please get your entire head to the top of your shoulders, do not zoom in as we need to see your entire head shape to adjust your pattern.
A larger nose should only be selected if you believe your nose is larger or wider than most people. It will NOT give extra room in the nose area if you have a normal nose, and will cause the hood to be baggy and loose in the eyes and cause the nose holes to not line up. If you are unsure about your nose, we highly recommend sending photos so we can determine what is best.
For your discretion, you can blur the eyes, lips, or any unique features. We delete these photos after notes are taken for your custom pattern.
Size exchange is always free, since we specialize in hoods we generally get it right 95% on the first time. If you provide measurements and photos we'll cover shipping costs. If you only provide measurements we still offer free size exchange but you will have to cover the return and reshipment costs.
You can send the photos with your order by replying to your order confirmation or attaching them to our LiveChat along with your order number. Our LiveChat is the safest and fastest way to email us.
Some standard sizes can still be exchanged, please see our exchange policy below or email us to check.
Color Chart
We mainly stock 4D Rubber sheeting. For others expand the menus below to see pricing and availability.▼ Textured Sheeting
We currently keep several styles in stock. For different patterns or colors email first to check availability.
Check out this item to see what is currently in stock or add this sheeting to any hood.
https://latexnemesis.com/textured-latex-hood-add-on/Photos of Colors:
▼ Printed Sheeting
We make these to order and can be printed on any 4D Rubber sheeting. To print on Radical Rubber colors you must add this item and the $30 fee for custom-ordered Radical Rubber sheeting listed below.
To see available colors and styles check out this item or add this item to any hood.
https://latexnemesis.com/printed-latex-hood-add-on/▼ Radical Rubber Sheeting
We do not keep Radical Rubber in stock. Please check RadicalRubber.co.uk for their full-color chart.
To add this to any hood there is a flat fee of $30 to order the single sheet from a local reseller. A single sheet can make at least 2 hoods including any add-ons to match. For example, you only need to add $30 if you are purchasing 1 or 2 hoods with the selected color. Use this item to add $30 to your cart value by selecting 30 of this item.
https://latexnemesis.com/custom-payment
4D Rubber Sheeting - Standard Colors:
Shown on hoods
Hood Styles & Options
Hood Options:
▼ Thickness
Standard .33mm thickness is the most versatile for fit, especially when getting a stock size. They are comfortable to wear and durable. Contrary to what some may think, .45mm is not more durable than .33mm. They are the same for durability but .45mm is a heavier and more restrictive feel on the face.
For .45mm thickness. Custom sizing is highly recommended as the fit has less flexibility than .33mm. Eye and mouth shapes stay a bit more defined and the hood has an all-around tighter feel for those who are into the heavy rubber feel. Most colors are available in .45mm, and we can get it in stock for no extra charge if we do not have it.
For .55mm and .65mm thickness. These are for heavy rubber lovers only, that want their hood to feel like a piece of bondage. Very heavy and not for the light-hearted. We highly recommend you email first before ordering these heavier hoods as they are NOT eligible for size exchange.
For .25mm thickness. It's a lightweight second-skin feel for those of you who want to feel like you are not even wearing a hood. It's paper thin yet durable. We only use .25mm for the face panel of the hood due to how hard it is to work with. Colors are currently limited to Black, Red, White, Transparent, Semi-Trans Smoke Black, Vibrant Pink, Semi-Trans Grey/Olive, Semi-Trans Purple, and Semi-Trans Blue. Please email us for the availability of other colors and the timeframe or additional costs.
▼ Vinyl Eyes
The unique vinyl eye hoods are made of a unique flexible vinyl.
All the colors are very transparent, just like tinted color glasses, with the exception of the smoke vinyl. The smoke vinyl is black to someone trying to look in, but you can see out just like sunglasses for a very anonymous look.
The vinyl eyes are currently available in normal, smooth, oval, or alien eye shapes. Got a different shape in mind? Email us first, we can custom-design almost any shape.
Hair Colors & Styles
Hair Styles:
▼ Straight vs Jumbo
Pre-Stretched hair is easy to maintain and keeps nice. If hair gets tangled you can use wig spray found here or use baby detangler spray to make it look like new instantly with a simple combing. Below are the colors we generally have or can get in-stock fast. See the guide in Special & Unique for how to find more colors.
Pre-Stretched Hair gets thinner towards the bottom so does not look as good braided as the Jumbo style hair
Jumbo Hair is a a lot more maintenance when left straight so it is braided by default. The hair is made of kanekalon synthetic hair and can tangle very easily if you do not use an ample amount of wig spray each time you use it. Even with spray and maintenance it can still become damaged and permanently tangled. Find wig spray here or you can find it at any beauty supply store. If you have an issue finding it, you can use baby detangler but it does not last as long.
After prolonged use, you may need to re-braid the hair to make it look neat and get rid of any stray hairs that have come loose. You can find a guide here. Small rubber bands can be found at any beauty supply store or section of major stores
▼ Special & Unique Hair
Here are a few examples of more unique hair. It is best to see below to search for and find the perfect hair so we can order it for your hood. For more expensive styles there may be an additional cost. Please email first with the desired hair to check if there is an extra charge.
For different colors of the Pre-stretched or Jumbo hair above you can search by using the terms "pre-stretched braiding red" or "braiding hair red" Hair shown straight will always be the silky pre-stretched version. Hair that is in a loose braid will always be kankelon Jumbo style.To search for hair you can use Amazon, eBay, or AliExpress for the largest selection of choices. AliExpress will have every hair as a very low cost but can take 6-8 weeks to get in. Usually, hair from here is at no extra charge for even the most fancy styles. Hair is easy to search for by entering style, or style and desired color. For example, ZiZi braids purple. Each photo has the hairstyle name under the example. There are many more styles available if you wish to search for the perfect hair. All hair must have a loop or fold to be secured to the hood. Longer hair, like the 48-inch or ZiZi braids, is 48 inches long but can be cut to your desired length
This hair can take 6-8 weeks to get in so it is not advised for stock items unless you wish to wait.
Wash & Clean guide before wearing
Your hood may arrive nice and shiny but it is NOT ready to wear. The factory powder on the sheeting will absorb lube causing it to not shine well. It can also make the hood feel tight and uncomfortable, or not sit on your head correctly. The hood is only shined so we can thoroughly check it for any flaws or glue spills before sending it to you. This powder is removed from the face during production and inspection, causing the face to be a lot shinier than the rest of the hood since all factory powder was removed in this area. White residue may also be present in the cracks of the seams from the rag pushing the powder around with the lube. Fuzzys and debris may also be present from the cotton balls and tools we use in construction. A quick wash will fix all this.To wash your hood please use light soap with no special ingredients (no aloe, vitamin E, etc) Usually we recommend common dish soap. Gently rub the inside of the hood and outside to get up the factory powder. Rinse thoroughly and let it dry. You can re-lube the inside and outside at any time. If you prefer the inside to not be luby we recommend you wash it as described and lube the inside and outside then let it sit for 24 hours. Then wash again with only water to remove excess lube. Still, keep the outside lubed at all times.
4D rubber is the best latex sheeting on the market because it is pure rubber and dyes, with no added chemicals and fillers like other companies. Their sheeting has a soft porous inside so the rubber will absorb the lube causing it to be silkly smooth against the skin even after the lube is washed/removed.
We have found that unscented normal makeup-removal wipes can remove make-up, foundation, and lipstick that may be stuck on the hood. We recommend you check it does not have any types of vitamin E or oils in it. Just cheap generic make-up wipes or Neutrogena wipes (not liquid, this is untested and can potentially lift the seams as any oil can break down the seams)
When putting your hood on and adjusting it be sure to never pull it by the eyes and mouth. These are structural points and can tear. We re-enforce them with .45mm triangles for durability and to make the hood last longer, but still stress on this area will cause rubber to break. It is best to adjust the hood with the palms of your hands to push it around into place. Should you need to move it by the eyes and mouth to adjust anything, ensure you are very slow and gentle to not put force on this area.
Full FAQs Page
See the full FAQ page here for answers to most questions
https://latexnemesis.com/faqs/- Rush Orders
- Repairs
- Storage of your items
- Shine or Custom size issues
- Custom sizing exchange policy & instructions
- Returns & Refunds
- Discrete Shipping & Credit Card Transaction Info
- Custom Designs and alterations to styles
- And more
Terms
When ordering you agree to all terms & conditions below.- Most questions can answered by checking out the full FAQs page linked above.
- Production times are shown on each item. The start of the production time shown is based on when you provide measurements or details missing from your order if applicable (custom sizing, hair color, etc) NOT the date you order if additional information required was not provided. Please provide these immediately to avoid delays and check your spam folder for emails from us. Rush orders must be confirmed by us on Live Chat or Email only or will be ignored and the fee non-refundable.
- Returns & Refunds policy can be found on our FAQs page. Full refunds are only if you wish to return your item within 10 days after receipt or if we are late in the production of your order. All other refunds are the full purchase price minus the non-refundable merchant fees we are charged, typically 4.5%.
- You will get an order confirmation after you place your order and a shipment notification with tracking once we ship. We may not communicate with you aside from that. For 19 years we are still known as the world's best hood on the market, our queue is very busy and our staff is very small due to the extremely high-quality standards we require. To focus on getting everyone's order done as fast as possible emails checking in on production may be ignored if your item is not late. Please only email if you need to change your address, delivery date, or details of your order.
